‘’KRAFTWERK’’ ECU Module

More power and torque
Kraftwerk ECU Module is a external ‘on-the-fly’ electronic device for engine tuning. By utilising the tolerances given by the vehicle manufacturer this optimisation enables a performance and torque increase of up to 20% for your turbo charged engine.

Better fuel consumption
Noticeably more power at low rpm and an improved degree of efficiency improve the fuel consumption by up to 8%. That's how the tuning pays back!

Selling my car, no problem!
Module is reusable for a new car, just tell us that you changed the car to a new turbo charged car and we upload the new software!

Easy do-it-yourself fitting
Custom made looms in OEM-quality with original connectors enable do-it-yourself fitting within a short time! A traceless refitting back to original conditions is possible at any time.

Noticeably more power and torque

Fitting the KRAFTWERK ECU module enables a performance und torque increase of up to 20% for various turbo charged engines.
The KRAFTWERK ECU module sets new German standards within the range of ‘’Plug & Drive’’ engine tuning. Sophisticated firmware and custom made looms allow the Module to be used for both diesel and petrol turbo engines.

The KRAFTWERK ECU module is attached to the engine´s periphery and takes control over ECU´s (engine control unit) signals. These changes show up to 20% more power and torque output whereas the ECU´s engine protective functions remain fully functional.

In order to meet all demanded requirements, the KRAFTWERK ECU module is thoroughly tested by German TÜV and complies with EMC tests and its certification processes, which ensures the adherence to European emission laws.

The raised performance output is arranged by our engineers in a way that neither the permissible exhaust gas temperature nor the individual part´s load limits are exceeded.

More power – more kilometres, less fuel!

The Krafwerk ECU Moduel also improves the thermodynamic efficiency of your engine. At the same time, it implies also reduced specific fuel consumption.

The torque increase also gives more power in the lower rev range and at part throttle. Faster up-shifting times are possible and therefore the car does not drive too long in the high revs. Fuel burning is optimised as well, hence a fuel consumption reduction is realised between 5-8% when the driver is consciously using this advantage.

The performance increase also enables driving in a higher gear at low engine speeds. This works on vehicles with manual and automatic transmission as well.

The combination of improved efficiency and lower engine speeds reduces the fuel consumption by up to 8%. So the costs for this performance increase can be recouped very quickly by fuel saving.

Absolutely maintenance neutral

Your vehicle can be serviced at the workshop as if it was a standard vehicle.
You can either unplug it within few minutes or leave it.

The KRAFTWERK ECU module behaves completely neutral and shows standard parameters on the diagnostic tools. All diagnostic functions remain fully.

In case you want to remove the ECU Module, it can be easily done without any trace.
The KRAFTWERK ECU module does not leave any faulty codes in the ECU memory.
The product comes with a full 2 years warranty